Back buttering is the practice of applying a layer of adhesive mortar directly to the back of a tile before setting it. The intention is to
increase adhesion, eliminate hollow spots and compensate for the natural warpage of large format tiles.
But the technique generates debate, because it isn’t always necessary. In this article, we ask when back bettering is the best approach.
When back buttering isn’t needed
For smaller tiles under 20×20 cm in area, or standard flat ceramics on a well-prepared substrate, back buttering is generally unnecessary. This is so long as the adhesive ridges on the substrate are properly collapsed when the tile is pressed into place. Collapsing the ridges ensures adequate contact between tile and mortar, providing full coverage and negating the need for an additional step.
When you should always back butter
There are specific circumstances where back buttering moves from optional to essential:
Large format tiles
Any tile where one side measures 30 cm or longer should be back buttered as standard. Larger tiles are more prone to hollow spots beneath the surface. This can lead to cracking under load. As back buttering eliminates voids, it ensures the full, consistent support that the tile needs.
Wet areas
In showers, bathrooms, or any external application, 100% mortar coverage is non-negotiable. Gaps beneath the tile create spaces that allow moisture to collect and expand or freeze. This is particularly relevant for outdoor settings in which decorative outdoor wall tiles can lift or crack over time. Back buttering is the most reliable way to achieve complete coverage.
Uneven surfaces or bowed tiles
This is where the substrate isn’t perfectly flat, or the tile itself has a natural bow. In these cases, back buttering acts as a levelling layer. The technique distributes support evenly and prevents the tile from rocking or settling unevenly while the adhesive is curing.
Natural stone
Stone tiles carry significantly more weight than standard ceramic or porcelain, and that weight requires a stronger, more comprehensive bond. Back buttering provides the adhesion needed to support the load reliably over time.
The key takeaway? When in doubt, back buttering can cover you against the cost of relaying an installation that hasn’t bonded correctly. It’s worth the extra minute per tile.